Bay Components

The BT60 internal 1/4" motor retainer is used for both minimum diameter rockets as well as general motor retention for any rocket motor that has a Loki forward closure with a 1/4-20 threaded end.

The BT60 internal 5/16" motor retainer is used for both minimum diameter rockets as well as general motor retention for any rocket motor that has an Aerotech forward closure with a 5/16 threaded end.

The BT60 to 38mm Nosecone Bay Adapter can be used with a Mach1 "Estes" type nosecone to allow for the installation of a standard 38mm SMT Designs nosecone bay.

The Captured Modular Nosecone Adapters are used to adapt a Captured Modular Nosecone base to other rocket airframe sizes.

The Standalone Modular Nosecone Adapters are used to adapt a Standalone Modular Nosecone base to other rocket airframe sizes.

The Charge Canister/Shock Cord Ties consists of two replacement canisters that can be used once the last set is no longer serviceable. These parts are compatible with any of the Mach1 BT60 bay kits.

The BT60 CT Bay Template is used to mark holes for 4-40 hardware on a BT60 coupler tube bay.

The 38mm/BT60 BT Bay Template is used to mark holes on body tubes to align with a coupler tube bay or other parts.

The DD (Dual Deploy) End Cap is a 5.9mm (0.23") thick cap with a 2.38mm (3/32") shoulder. The end cap is used on the removable end of a bay and attaches to a mounting ring.

The DD (Dual Deploy) End Cap is a 5.9mm (0.23") thick cap with a 2.38mm (3/32") shoulder. The end cap is used on the removable end of a bay and attaches to a mounting ring.

The DD (Dual Deploy) End Cap is a 5.9mm (0.23") thick cap with a 2.38mm (3/32") shoulder. The end cap is used on the removable end of a bay and attaches to a mounting ring.

The DD (Dual Deploy) End Cap is a 5.9mm (0.23") thick cap with a 2.38mm (3/32") shoulder. The end cap is used on the removable end of a bay and attaches to a mounting ring.