Bay Components
98mm DD End Cap
EC-00923
The DD (Dual Deploy) End Cap is a 7.1mm (0.28") thick cap with a 2.38mm (3/32") shoulder. The end cap is used on the removable end of a bay and attaches to a mounting ring.
$5.45
BT60 DD End Cap
EC-00423
The BT60 DD (Dual Deploy) End Cap is a 5.9mm (0.23") thick cap with a 2.38mm (3/32") shoulder. The end cap is used on the removable end of a bay and attaches to a mounting ring.
$1.45
Captured Modular Nosecone Bay Kits
CMNC
The Captured Modular Nosecone Bay Kit is a complete set of SMT Designs parts that can be assembled into a fully functional module for the supported devices and batteries listed (customer supplies device and battery).
$13.95
38mm RDD End Cap
EC-01323
The RDD (Redundant Dual Deploy) End Cap is a 5.9mm (0.23") thick cap with a 2.38mm (3/32") shoulder. The end cap is used on the removable end of a bay and attaches to a mounting ring.
$1.45
54mm RDD End Cap
EC-01523
The RDD (Redundant Dual Deploy) End Cap is a 5.9mm (0.23") thick cap with a 2.38mm (3/32") shoulder. The end cap is used on the removable end of a bay and attaches to a mounting ring.
$2.45
65mm RDD End Cap
EC-01623
The RDD (Redundant Dual Deploy) End Cap is a 5.9mm (0.23") thick cap with a 2.38mm (3/32") shoulder. The end cap is used on the removable end of a bay and attaches to a mounting ring.
$3.45
75mm RDD End Cap
EC-01723
The RDD (Redundant Dual Deploy) End Cap is a 5.9mm (0.23") thick cap with a 2.38mm (3/32") shoulder. The end cap is used on the removable end of a bay and attaches to a mounting ring.
$4.45
98mm RDD End Cap
EC-01923
The RDD (Redundant Dual Deploy) End Cap is a 5.9mm (0.23") thick cap with a 2.38mm (3/32") shoulder. The end cap is used on the removable end of a bay and attaches to a mounting ring.
$5.45
98mm Plug-In Bay
SPPRJ-00003
The 98mm Plug-In Bay is designed to install into a Wildman 98mm Nosecone coupler that has two 1/4-20 threaded rods running down from a pre-installed bulkhead at the top of the coupler. Once installed, a metal bottom stepped bulkhead is added and fastened down using 1/4-20 hardware.
$42.65
Hybrid Bay 54/65/75mm Kevlar Cord Tie Kit
SKTP-00508
The Kevlar cord tie kit can be used to replace a damaged tie or as a modification to a hybrid bay with eye bolt ties.
$3.00
98mm Hybrid Bay Kits
BKC-20987
The Hybrid Bay Kit is a complete set of SMT Designs parts that can be assembled into fully functional electronics bay (customer supplies coupler tube, device, & battery).
$29.95
Hybrid Bay 54/65/75mm Eye Bolt Tie Kit
SKTP-00608
The eye bolt tie kit is a factory assembled part that can be used to replace a damaged eye bolt assembly or as an upgrade for a hybrid bay with kevlar ties.
$4.00