Categories
Picture of 98mm CT Bay Template

98mm CT Bay Template

The 98mm CT Bay Template is used to mark holes locations that need to be drilled when constructing a coupler tube bay.
Be the first to review this product
Manufacturer: SMT Designs
SKU: CTBT-00951
Shipping date: 5 - 40 days depending on order size
*

Note: This is not an all encompassing list. Manufacturers do change their

products, add new materials, and can be different between sizes of tubing.

Please measure to assure a proper fit.

Thin Wall (select if wall thickness is 1.1mm or under)

Mach1 BT55, BT60 - 1.1mm

Normal Wall (select if wall thickness is over 1.1mm

and 1.6mm or under)

Blue Tube 2.0 - 1.6mm

LOC Cardboard - 1.52mm

PML Phenolic - 1.5mm

Thick Wall (select if wall thickness is over 1.6mm

and 2.1mm or under)

MadCow - 1.9mm

Rocketry Warehouse (Proline) - 2.1mm

Ultra Thick Wall (select if wall thickness is over

2.1mm and 2.6mm or under)

LOC (larger tubes) - 2.6mm

$5.95
Share

The 98mm CT Bay Template is used to mark holes  locations that need to be drilled when constructing a coupler tube bay.  There are holes at 120 degree intervals at 9.52mm (3/8 inch) from the end of the coupler tube for bay mounting.  There are two additional holes at the same distance to locate one or two arming switch locations.  The template end has all the hole locations for charge canisters, charge connections, and the threaded rods.

Contents

  • One 98mm CT Bay Template

Specifications

  • Diameter mm
  • Length mm
  • Weight g
Customers who bought this item also bought
FeatherWeight GPS/1S 400mAh 65mm Bay

Standalone Modular Nosecone Bay Kits

SMNC
The Standalone Modular Nosecone Bay Kit is a complete set of SMT Designs parts that can be assembled into a fully functional module for the supported devices and batteries listed (customer supplies device and battery).
$17.95
Redundant Dual Deploy Bay

98mm Hybrid Bay Kits

BKC-20987
The Hybrid Bay Kit is a complete set of SMT Designs parts that can be assembled into fully functional electronics bay (customer supplies coupler tube, device, & battery).
$29.95
Marsa Systems Marsa33LHD

Hybrid Bay Device Platform Kits

HDP
Device platforms are used to typically mount larger electronic devices (RRC3 sized) in SMT Designs hybrid bays. Of note, they can also be used as device mounts for a more traditional bay designs.
$3.45
Picture of 98mm BT Bay Template

98mm BT Bay Template

BTBT-00952
The 98mm BT Bay Template is used to mark hole locations in a body tube for the mounting of a coupler tube bay.
$5.95
Related products
Picture of 98mm BT Bay Template

98mm BT Bay Template

BTBT-00952
The 98mm BT Bay Template is used to mark hole locations in a body tube for the mounting of a coupler tube bay.
$5.95
Picture of 98mm Fin Holder

98mm Fin Holder

FNH-00953
The 98mm Fin Holder is designed to hold a single fin in place while the root tab is glued in place whether it is a through wall or air frame surface mount.
$13.95
Redundant Dual Deploy Bay

98mm Hybrid Bay Kits

BKC-20987
The Hybrid Bay Kit is a complete set of SMT Designs parts that can be assembled into fully functional electronics bay (customer supplies coupler tube, device, & battery).
$29.95
Information
Customer service
Copyright © 2016-2024 SMT Designs. All rights reserved.
Powered by nopCommerce