75mm Components
There are just a couple of acronyms that are used in the descriptions, so any references to BT is regarding Body Tubes and CT refers to Coupler Tubes. 54mm is used as a general term for the basic size rather than an absolute measurement. The parts here are available in thin (Mach1), normal (Wildman) and heavy (MadCow) wall thicknesses for coupler tubes. If you have any questions or a special size requirement, please contact SMT Designs on the Contact Us page. I will adjust diameters of parts for you given your measurements for no charge other than the normal product price (only caveat - non-returnable unless I made them wrong).
75mm DD End Cap
EC-00723
The DD (Dual Deploy) End Cap is a 5.9mm (0.23") thick cap with a 2.38mm (3/32") shoulder. The end cap is used on the removable end of a bay and attaches to a mounting ring.
$4.45
75mm RDD End Cap
EC-01723
The RDD (Redundant Dual Deploy) End Cap is a 5.9mm (0.23") thick cap with a 2.38mm (3/32") shoulder. The end cap is used on the removable end of a bay and attaches to a mounting ring.
$4.45
Hybrid Bay 54/65/75mm Kevlar Cord Tie Kit
SKTP-00508
The Kevlar cord tie kit can be used to replace a damaged tie or as a modification to a hybrid bay with eye bolt ties.
$3.00
Hybrid Bay 54/65/75mm Eye Bolt Tie Kit
SKTP-00608
The eye bolt tie kit is a factory assembled part that can be used to replace a damaged eye bolt assembly or as an upgrade for a hybrid bay with kevlar ties.
$4.00
75mm Fin Holder
FNH-00753
The 75mm Fin Holder is designed to hold a single fin in place while the root tab is glued in place whether it is a through wall or air frame surface mount.
$10.95
75mm CT Bay Template
CTBT-00751
The 75mm CT Bay Template is used to mark holes and window locations when constructing a coupler tube bay.
$4.95
75mm BT Bay Template
BTBT-00752
The 75mm BT Bay Template is used to mark hole locations in a body tube for the mounting of a coupler tube bay.
$4.95
54mm, 65mm, 75mm Hybrid Bay Kits
BKC-20587
The Hybrid Bay Kit is a complete set of SMT Designs parts that can be assembled into fully functional electronics bay (customer supplies coupler tube, device, & battery).
$24.95
Captured Modular Nosecone Bay Kits
CMNC
The Captured Modular Nosecone Bay Kit is a complete set of SMT Designs parts that can be assembled into a fully functional module for the supported devices and batteries listed (customer supplies device and battery).
$13.95
Standalone Modular Nosecone Bay Kits
SMNC
The Standalone Modular Nosecone Bay Kit is a complete set of SMT Designs parts that can be assembled into a fully functional module for the supported devices and batteries listed (customer supplies device and battery).
$17.95
54mm, 65mm, and 75mm Modular Deployment/Tracker Nosecone Bay Kits
MDNC-00200
The Modular Deployment/Tracker Nosecone Bay Kit is a complete set of SMT Designs parts that can be assembled into a fully functional module for the supported devices and batteries listed (customer supplies devices and batteries).
$19.95
Replacement 54-75mm Bay Charge Canister
BCC-05201
The Replacement Charge Canister is used to replace damaged or worn canisters in any of the 54, 65, or 75mm bay products from SMT Designs.
$1.95
- 1
- 2