65mm CT Bay Template

The 65mm CT Bay Template is used to mark holes and window locations when constructing a coupler tube bay.

SKU: CTBT-00651

Shipping date: 5 - 40 days depending on order size

Tube Wall Thickness *
Note: This is not an all encompassing list. Manufacturers do change their
products, add new materials, and can be different between sizes of tubing.
Please measure to assure a proper fit.
Thin Wall (select if wall thickness is 1.1mm or under)
Mach1 BT55, BT60 - 1.1mm
Normal Wall (select if wall thickness is over 1.1mm
and 1.6mm or under)
Blue Tube 2.0 - 1.6mm
LOC Cardboard - 1.52mm
PML Phenolic - 1.5mm
Thick Wall (select if wall thickness is over 1.6mm
and 2.1mm or under)
MadCow - 1.9mm
Rocketry Warehouse (Proline) - 2.1mm
Ultra Thick Wall (select if wall thickness is over
2.1mm and 2.6mm or under)
LOC (larger tubes) - 2.6mm

Thin Wall
Normal Wall
Heavy
Ultra Heavy

$4.45

The 65mm CT Bay Template is used to mark holes when constructing a coupler tube bay. There are holes at 120 degree intervals at 6.35mm (1/4 inch) from the end of the coupler tube for bay mounting. There are two additional holes at the same distance to locate one or two arming switch locations. Finally, there is a single hole at 18.05mm (3/4 inch) for a vent hole if using the bay for deployment or air pressure monitoring.

Contents

One 65mm CT Bay Template

Specifications

Diameter mm
Length mm
Weight g

Customers who bought this item also bought

6-32 Nut Holder Kit for 1010 Rail Buttons

NHRB6-00133

These nut holders use 6-32 nuts to secure a pair of rail buttons to a body tube (BT).

$1.45

65mm BT Bay Template

BTBT-00652

The 65mm BT Bay Template is used to mark hole locations in a body tube for the mounting of a coupler tube bay.

$4.45

Standalone Modular Nosecone Bay Kits

SMNC

The Standalone Modular Nosecone Bay Kit is a complete set of SMT Designs parts that can be assembled into a fully functional module for the supported devices and batteries listed (customer supplies device and battery).

$17.95

Captured Modular Nosecone Adapters

CMAD

The Captured Modular Nosecone Adapters are used to adapt a Captured Modular Nosecone base to other rocket airframe sizes.

$1.50